Home / Guides

What is included in a permit-ready drawing set?

By The Archtri team · Last reviewed

A permit-ready drawing set is the group of sheets a building department needs to review a project: a site plan, floor plans, elevations, building sections, construction details, structural information and code notes. Exact contents depend on your jurisdiction, so confirm the submittal checklist with your local building department before drawing starts.

Key takeaways

  • Most sets include a site plan, floor plans, elevations, sections, details and general notes.
  • Structural, energy, flood and wind information is often required in addition to the architectural sheets.
  • Every building department publishes its own submittal checklist, and that checklist wins over any general guide.
  • A complete first submittal is the best way to avoid avoidable review comments.

What does "permit-ready" actually mean?

Permit-ready means the drawings are complete enough for a plans examiner to review them against the adopted building code without needing to ask for basic missing information. It does not mean the permit is guaranteed. The building department decides that after review, and it can still issue comments that need a response.

Think of the set as a package that answers three questions: what is being built, where it sits on the property, and how it is built so it can meet code. Anything that leaves one of those questions open tends to slow the review.

Which sheets are usually in the set?

The list below covers what most residential submittals contain. Smaller projects may combine some sheets, and larger or more complex projects add more. Treat it as a starting point, not a substitute for your local checklist.

  • Cover sheet with project data, scope, applicable code editions and a sheet index.
  • Site plan showing property lines, setbacks, the existing and proposed structures, driveways and easements.
  • Floor plans for every level, with dimensions, room labels, door and window locations and notes.
  • Exterior elevations showing heights, roof pitches, materials and openings.
  • Building sections that explain how floors, walls and roofs stack up vertically.
  • Wall sections and construction details for connections, flashing, stairs, guards and similar items.
  • Foundation and framing plans, usually with structural notes and schedules.
  • Roof plan, door and window schedules, and general notes.
  • Electrical, plumbing and mechanical layouts where the jurisdiction asks for them.

What extra information do building departments often ask for?

Beyond the core sheets, many jurisdictions want supporting documents. These commonly include an energy code compliance form, product approvals or specification sheets for windows and doors, a survey, and proof that the project meets local zoning rules such as setbacks and lot coverage.

In coastal areas you may also be asked for wind design information and flood zone data. Our guide on Florida wind load and flood requirements explains how those requirements affect the drawings. For projects where a licensed engineer must calculate or seal structural elements, our structural drafting and engineering calculations services coordinate with that work, but the seal itself must come from the licensed professional your jurisdiction requires.

Who needs a permit-ready set?

Homeowners planning an addition, remodel, garage conversion or accessory dwelling unit need one. So do contractors and builders who are pulling permits for clients, and architects or engineers who want drafting support so their team can focus on design and review. If you are not sure whether your project needs a permit at all, call the building department. Many ordinary repairs do not, while structural, electrical and plumbing changes usually do.

How do I get a set that passes review the first time?

Start by getting the submittal checklist from your building department and sharing it with your drafter at the beginning, not the end. Provide a survey or site measurements, photos of existing conditions, and any must-haves such as room sizes or ceiling heights. Decide early whether an engineer or architect needs to be involved.

Then review the drawings before they go in. Check that dimensions add up, that the scope on the cover sheet matches the plans, and that notes match the code edition your jurisdiction uses. No drafter can promise approval, but a complete, consistent set removes most of the avoidable reasons for rejection. You can request a complimentary written quote with your project details and we will tell you what we would need to prepare a set for your area.

What mistakes cause drawing sets to be rejected?

Most rejections come from a short list of avoidable problems. Dimensions that do not add up between sheets, a site plan without accurate setbacks, missing notes about the code edition, and schedules that do not match the plans are common examples. Another is a scope mismatch: the cover sheet describes one project while the plans show another. Reviewers are checking many projects, so a set that is hard to read tends to attract more comments than a set that is clean and consistent. A careful internal check before submittal is cheap compared with a resubmittal cycle.

Frequently asked questions

Does a permit-ready set include structural engineering?

Not always. Drafted structural plans show the framing and foundation layout, but where the building department requires engineered design or a sealed drawing, a licensed engineer must provide it. Ask your building department what it requires for your project.

Are 3D renderings part of a permit set?

No. Permit review is based on 2D drawings and supporting documents. Renderings are useful for client approval and design decisions, and you can learn more in our guide on 2D drawings versus 3D renderings.

How many sheets will my set have?

It depends on project size and what your jurisdiction requires. A small addition may need only a handful of sheets, while a new home needs many more. A quote request with your scope is the quickest way to find out.

Can I use the same set in a different city?

Often not without changes. Codes, wind and flood requirements, product approvals and submittal rules differ between jurisdictions, so a set prepared for one city usually needs review before it is reused in another.

Where we help

Archtri prepares drawings for projects across Florida and Texas. Always confirm requirements with your local building department.

CallGet a quote