In Texas, rules for accessory dwelling units and home additions are set mostly by cities and counties, so zoning, size limits, setbacks, parking and utility requirements vary by location. Start by confirming local rules, then prepare drawings that show the site, floor plan, elevations, structure and code information your building department asks for.
Key takeaways
- Local zoning drives what you can build, including size, height, setbacks and owner rules.
- Texas does not have a single statewide residential permit process, so check your own city or county.
- Utilities, drainage and deed restrictions can matter as much as building code.
- A site plan with accurate setbacks and existing conditions is usually the most important drawing.
Who sets the rules for ADUs and additions in Texas?
Cities and, in some areas, counties set most of the rules. Zoning ordinances decide whether an accessory dwelling unit is allowed, how large it can be, how far it must sit from property lines and whether parking or owner occupancy is required. Building codes and the adopted editions are also set locally, so two Texas cities can have different requirements.
State and local laws in this area can change, so confirm current rules with your city planning and building departments before you invest in design. This guide is general information, not legal advice.
What should I check before drawing an ADU?
Gather answers to these questions first:
- Is an ADU allowed on my lot under current zoning, and in what form: detached, attached or garage conversion?
- What are the size, height, setback and lot coverage limits?
- Are there parking, owner-occupancy or rental restrictions?
- Can the existing water, sewer or septic and electrical service support another dwelling, or are upgrades needed?
- Does an HOA or deed restriction limit accessory structures?
- Does the lot have drainage, easement or tree protection issues?
What should the drawings show?
A site plan showing property lines, setbacks, existing and proposed structures and utility connections is usually the key sheet, because it proves the project fits the lot. Floor plans, elevations, sections and construction details show how the unit is built. Where required, foundation and framing plans and energy code information are added.
For a garage conversion or an addition, accurate existing conditions are essential. Our as-built drawings work records the structure you are building onto, and our architectural drafting service turns your design into a permit-ready set. See also what is included in a permit-ready drawing set.
What Texas-specific issues come up?
Foundations deserve attention. Soil conditions vary across the state, and some areas have expansive clay that influences foundation design, which an engineer usually addresses. In coastal counties, additional wind and insurance-related requirements may apply, and some areas also have flood zones to account for.
Texas also has many different local code adoptions and, in some places, limited or no inspection of residential construction in unincorporated areas. Even then, drawings, setbacks and deed restrictions still matter for safety and for resale. Check with your jurisdiction about what applies.
How do I get started?
Contact your city or county planning and building offices and ask what is required for your property type. Collect a survey, photos and your goals, then request a complimentary quote. Archtri works with homeowners, contractors and builders across Texas, and you can read more on our Texas drafting services page.
If a licensed engineer or architect is needed for your project, we can coordinate with them. Your written quote will spell out what we prepare and what remains with licensed professionals.
What costs besides drawings should I plan for?
Drawings are only one part of an ADU or addition. Permit fees, utility connection or capacity fees, survey costs, engineering for foundations and structure, and any impact or tap fees your city charges can add up. You may also need to pay for HOA review or tree and drainage studies in some areas. Ask your city for its fee schedule and ask your contractor what utility work is needed. Understanding these items early helps you set a realistic budget.
Frequently asked questions
Does Texas have a statewide ADU law?
Rules in this area are largely local and can change. Confirm current state and local requirements with your city or county before you design.
Can I convert a garage into an ADU?
Often possible, but it depends on zoning, parking rules and building code requirements such as egress, insulation and utilities. Local approval is needed.
Do I need a survey for an addition?
Usually a survey or accurate site measurements are needed to prove setbacks. Check your jurisdiction and your deed restrictions.
Will my HOA need to approve the project?
If you are in an HOA, it likely has its own approval process separate from the city. Start that early because it can affect design.
Where we help
Archtri prepares drawings for projects across Florida and Texas. Always confirm requirements with your local building department.