
Archtri serves Austin homeowners, contractors, builders, architects and engineers with drafting and permit drawing services. We prepare floor plans, elevations, as-built drawings, structural drafting and 3D renderings remotely, formatted for the City of Austin and surrounding Travis County and Hill Country jurisdictions. Request a complimentary quote for your Austin project.
Local conditions
What shapes permit drawings in Austin
ADUs, infill and a changing zoning environment
Austin has one of the most active residential infill markets in Texas. Accessory dwelling units, backyard cottages, garage apartments, duplex conversions and small-lot redevelopment are common projects, and the city has revisited its rules on lot sizes, unit counts and ADUs in recent years. Because those rules change, the zoning district, lot size, impervious cover limit, setbacks, height and compatibility standards for your address should be confirmed with the City of Austin before design starts. We draft site plans, floor plans and elevations that show the information a reviewer will look for, once you have confirmed what your lot allows.
Expansive clay, limestone and foundation design
Soil conditions in the Austin area vary widely. East of the city, expansive clay soils are common, and they swell and shrink with moisture, which is why foundation design in Central Texas is a serious topic for both slab-on-grade and pier-and-beam construction. To the west, shallow limestone and rock affect excavation and foundation approaches. A geotechnical report and a foundation plan prepared by a licensed engineer is the usual route, and we draft foundation plans and details from your engineer's design. We do not replace the engineer's judgment on soil and structural design.
Water, drainage and environmental rules
Parts of Austin sit over or near the Edwards Aquifer recharge and contributing zones, and watershed protection rules can apply to impervious cover, drainage and water quality. Creeks and floodplains also run through many neighborhoods, so some lots carry floodplain restrictions. The city's watershed and floodplain staff can tell you what applies to your parcel, and the answer can influence how large a project can be and where it can sit on the lot. We include the site information your project needs to show once those constraints are known.
Wildfire, wind and hail
Central Texas storms can bring hail and strong straight-line winds, and some hillside and edge-of-city areas have wildfire exposure. Roofing and exterior material selection, and in some cases construction details in those areas, may be affected. Owners and insurers care about these choices, so we reflect them in the notes and schedules your design team specifies.
Requirements differ by jurisdiction and change over time. Always confirm current code, flood, zoning and submission requirements for your address with the Austin area building department or Travis County before you finalize a design.
Services
Each service below is delivered remotely and formatted to the submission requirements of your building department.
Architectural Drafting in Austin
We provide our clients with up-to-code and functional drafts that represent the construction you imagined with precision. This draft will help your construction team bring your imaginations to life.
Structural Drafting in Austin
In order to check the feasibility of your construction work, we offer structural drafting services. With the help of the latest drafting software and skilled drafters, we provide you with detailed design and construction drawings for your project
Photorealistic 3D Renderings in Austin
If you are looking for 3D designs with meticulous attention to detail, Photorealistic 3D Renderings are your solution. We use cloud data to create 3D models complete with every detail, including utilities and multiple layers
3D Animated Tours in Austin
Save yourself from the expense of constructing a full model home and experience 3D Animated Tours. You can take a virtual tour of your potential project and get a better sense of what you’ll be getting as an end result.
Lot Surveying in Austin
Archtri provides lot surveying services for empty lots that would hold your potential commercial or residential building. Our job is to determine whether the land you are planning construction on is stable or not.
Engineering Calculations in Austin
Our engineers provide you with accurate calculations that back up your construction plan to help you design your home or commercial building. This ensures your construction team has accurate measurements with them when they start the project.
BIM Modeling in Austin
Contractors, designers, installers, and cost consultants can use the BIM Modeling technology to take a thorough look into the primary elements present in any construction project. This allows them to change any variables as per the demands of the project. All components of the project are integrated using 3D BIM modeling technology, including concept, project controls, budgeting, scheduling, building, and accounting, offering holistic solutions to every project.
As-Built Drawings in Austin
Accurate existing-condition drawings from your photos, measurements and plans.
Typical projects
Projects we draft in Austin
- Accessory dwelling units, backyard cottages and garage apartments
- Home additions, remodels and second-story additions on older Austin lots
- Duplex, small multifamily and infill redevelopment drawings
- New custom homes, including foundation plans coordinated with your engineer
- As-built drawings, renderings and animated tours for design review and marketing
Who we serve
Archtri serves Austin, Texas, working with homeowners planning an ADU or remodel, contractors and builders who need permit sets quickly, developers and investors working infill sites, and architects and engineers who want extra drafting, BIM or visualization capacity. Our Austin work is handled remotely, with email, phone and video coordination.
How a remote project works
Send your address, sketches, survey, photos and any existing plans through the quote form, and tell us the zoning information you have gathered. We confirm scope and timeline, issue drafts for review, revise and deliver final PDF files with CAD or BIM formats where included. We can also match a submission checklist from the City of Austin if you share it with us.
How it works
Receive project
Send us your sketches, plans or ideas. We confirm scope, timeline and what you need delivered.
Planning
We review feasibility, code requirements and the details that drive cost, so surprises surface early.
Creative design
Drafts and renderings come back for your review, with revision rounds built in.
Ready to build
Final drawings go to your construction team: clear, complete and ready to price.
Questions
Can you draw plans for an Austin ADU or backyard cottage?
Yes. We prepare site plans, floor plans, elevations, sections and details for accessory dwelling units. Whether an ADU is allowed on your lot, and its size, height, setback and impervious cover limits, are set by the City of Austin, so confirm them before design.
Do your Austin drawings include foundation plans?
We draft foundation plans and details from the design provided by your structural engineer. Foundation type and sizing depend on soil conditions and must be determined by a licensed engineer.
Can you help with Austin duplex or small multifamily drawings?
Yes. We prepare plans for residential infill projects, though the number of units allowed on a lot is a zoning question that should be confirmed with the City of Austin.
Do you serve Austin homeowners and builders in the Hill Country and Travis County?
Yes. We serve the Austin area and nearby communities. The jurisdiction reviewing your permit can differ between the city, unincorporated Travis County and neighboring cities, so confirm which department applies to your address.
How do I get started with Archtri in Austin?
Use the quote form with your project details, or call us. We reply with a quote and timeline and start drafting once scope is confirmed.