Archtri provides drafting and permit drawing services for Houston homeowners, contractors, builders, architects and engineers. We prepare floor plans, elevations, as-built drawings, structural drafting and 3D renderings remotely, formatted for the City of Houston and surrounding Harris County jurisdictions. Request a complimentary quote for your Houston project.

Local conditions

What shapes permit drawings in Houston

Flooding and floodplain rules

Flooding is the defining condition for building in Houston. Much of the metro area is low and flat with bayous running through it, and after repeated major flood events the city and county have tightened floodplain development rules. In mapped floodplains, the rules can require the lowest floor to sit above the base flood level by a set margin, and the margin the city currently requires can exceed older standards. Drawings in these areas need elevation information, flood-resistant details and equipment placement that agree with the elevation certificate. Check the current floodplain regulations with the City of Houston permitting office or the Harris County floodplain office for your address.

No conventional zoning, but deed restrictions and ordinances

Houston is unusual among large American cities for not having a conventional zoning code. Land use is shaped instead by deed restrictions, subdivision rules and city ordinances covering setbacks, parking and other standards. A project can be perfectly legal under the city's rules and still violate a neighborhood deed restriction, so owners should read their restrictions or ask the civic association before committing to a design. We draft the plans you provide direction for, and we encourage clients to confirm both the city requirements and any deed restrictions early.

Clay soils, subsidence and foundation design

Much of Houston sits on expansive clay soils that move with moisture, and some areas have seen subsidence. Foundation design here usually involves a geotechnical report and an engineered slab or pier-and-beam system, often with careful attention to drainage and grading around the house. We draft the foundation plans and details your structural engineer designs and keep them coordinated with the rest of the set.

Wind and the Gulf Coast

Houston is within reach of Gulf hurricanes, and some coastal areas of Texas are designated catastrophe areas where windstorm certification may be needed for insurability. Whether your property falls within such an area depends on its location in Harris County and nearby counties, so ask the building department and your insurance agent. Drawings can carry structural wind notes and opening protection details as your engineer specifies.

Requirements differ by jurisdiction and change over time. Always confirm current code, flood, zoning and submission requirements for your address with the Houston area building department or Harris County before you finalize a design.

Services

Each service below is delivered remotely and formatted to the submission requirements of your building department.

Architectural Drafting in Houston

We provide our clients with up-to-code and functional drafts that represent the construction you imagined with precision. This draft will help your construction team bring your imaginations to life.

Structural Drafting in Houston

In order to check the feasibility of your construction work, we offer structural drafting services. With the help of the latest drafting software and skilled drafters, we provide you with detailed design and construction drawings for your project

Photorealistic 3D Renderings in Houston

If you are looking for 3D designs with meticulous attention to detail, Photorealistic 3D Renderings are your solution. We use cloud data to create 3D models complete with every detail, including utilities and multiple layers

3D Animated Tours in Houston

Save yourself from the expense of constructing a full model home and experience 3D Animated Tours. You can take a virtual tour of your potential project and get a better sense of what you’ll be getting as an end result.

Lot Surveying in Houston

Archtri provides lot surveying services for empty lots that would hold your potential commercial or residential building. Our job is to determine whether the land you are planning construction on is stable or not.

Engineering Calculations in Houston

Our engineers provide you with accurate calculations that back up your construction plan to help you design your home or commercial building. This ensures your construction team has accurate measurements with them when they start the project.

BIM Modeling in Houston

Contractors, designers, installers, and cost consultants can use the BIM Modeling technology to take a thorough look into the primary elements present in any construction project. This allows them to change any variables as per the demands of the project. All components of the project are integrated using 3D BIM modeling technology, including concept, project controls, budgeting, scheduling, building, and accounting, offering holistic solutions to every project.

As-Built Drawings in Houston

Accurate existing-condition drawings from your photos, measurements and plans.

Typical projects

Projects we draft in Houston

  • Home elevations, raises and flood-resilient rebuilds
  • Additions, second stories and garage apartments
  • New custom homes and townhome projects on infill lots
  • Commercial tenant improvements, retail and restaurant interiors
  • As-built drawings and renderings for permits, insurance and marketing

Who we serve

We work with Houston homeowners recovering from or preparing against flooding, contractors and builders who need permit-ready sets, developers building townhomes and infill, and architects and engineers who need drafting, BIM or visualization support. We work remotely by email, phone and video.

How a remote project works

Share your project through our quote form with photos, measurements, survey, elevation certificate and any existing plans. We confirm scope and schedule, send drafts for review, revise and deliver final PDFs and CAD or BIM files as the scope requires.

How it works

01

Receive project

Send us your sketches, plans or ideas. We confirm scope, timeline and what you need delivered.

02

Planning

We review feasibility, code requirements and the details that drive cost, so surprises surface early.

03

Creative design

Drafts and renderings come back for your review, with revision rounds built in.

04

Ready to build

Final drawings go to your construction team: clear, complete and ready to price.

Questions

Can you draw plans for raising a Houston home out of the floodplain?

Yes. We prepare as-built drawings and the elevation or rebuild plans your engineer and contractor need to show. Floodplain standards are set by the City of Houston or Harris County, so confirm the current elevation requirement for your address.

Does Houston have zoning I need to check?

Houston does not have conventional zoning, but deed restrictions, subdivision rules and city ordinances still apply. Review your deed restrictions and confirm city requirements before finalizing a design.

Do you coordinate with Houston structural engineers for foundations?

We draft foundation plans from your engineer's design and keep them coordinated with floor plans and sections. Foundation design itself must come from a licensed engineer.

Can you prepare Houston townhome and infill drawings?

Yes. We prepare plans for townhomes and small infill buildings, formatted to the review requirements you share with us.

CallGet a quote