
Home / Tools
Enter the total rise and get the number of risers, exact riser height, tread count, total run and stringer length, with checks against typical residential limits.
- Number of risers
- 15
- Exact riser height
- 7.2 inAll risers are equal
- Number of treads
- 14One fewer than risers
- Total run
- 12' 3"147 in
- Stringer length
- 15' 2.4"Before cutting the ends
- Stair angle
- 36.3 degrees
How it works
Stairs are built from equal risers and equal treads. Divide the total rise by a target riser height, round to a whole number of risers, then divide again to get the exact riser.
A staircase always has one fewer tread than risers, because the top floor acts as the last tread. The tool checks the result against common residential limits. Always confirm limits with your local building department.
How many risers do I need?
Divide the total rise by your target riser height and round to the nearest whole number. Then divide the total rise by that number to get the exact riser height.
What is a comfortable riser and tread?
Many residential stairs use risers around 7 to 7.75 inches and treads around 10 to 11 inches. A common comfort rule is that two risers plus one tread should total about 24 to 25 inches.
Do codes limit stair dimensions?
Yes. Building codes set maximum riser heights and minimum tread depths, plus headroom and handrail rules. Limits vary by jurisdiction, so confirm with your local building department.