
Home / Tools
Calculate rafter length, roof area, roofing squares and angle for a gable roof from the building width, length, pitch and overhang, with a waste allowance.
- Rafter length
- 17.89 ftAlong the slope, including overhang
- Roof area
- 1,503 sq ft
- Roofing squares
- 15One square is 100 sq ft
- Squares to order
- 16.5With 10% waste
- Slope factor
- 1.118Multiply flat area by this
- Roof angle
- 26.6 degrees
How it works
Pitch is the rise in inches for every 12 inches of horizontal run. A 6:12 roof rises 6 inches for each foot.
This tool assumes a simple gable roof with two equal planes. Hips, valleys, dormers and complex roofs add area, so add more waste or have the roof measured.
How do I calculate roof area from pitch?
Multiply the flat footprint by the slope factor, which is the square root of pitch squared plus 144, divided by 12. For a 6:12 roof the factor is about 1.118.
What is a roofing square?
A roofing square covers 100 square feet of roof. Shingles and many roofing materials are sold by the square.
How much waste should I allow?
Simple gable roofs often use about 10 percent. Complex roofs with hips and valleys need more, and cut-up roofs can need 15 percent or higher.