Home / Tools

Add up the R-value of the layers in a wall or roof, see the U-factor, and estimate heat loss through an area for a temperature difference.

Check the product label
Total R-12.5, U-0.08R-12.33.5 inR-0.20.5 inInside to outside, thickness in proportion
Total R-value
12.5Sum of the layers
U-factor
0.08One divided by R
Heat loss
2,405 BTU/hrThrough the whole area at that temperature difference

Real assemblies also have air films, framing and gaps, which lower the effective R-value. Treat this as a layer sum, not a code compliance result.

No cost. We use your email only to reply about your project.

How it works

R-value measures resistance to heat flow, so higher is better. Layers add up. U-factor is the inverse and is used to calculate heat loss.

Wood framing conducts heat better than insulation, so an assembly with studs performs below the sum of its insulation layers. Energy codes set required values by climate zone.

What does R-value mean?

It is the thermal resistance of a material or assembly. A higher R-value slows heat flow more.

How do I find R per inch?

It is printed on insulation labels. Fiberglass batts are often around R-3 to R-4 per inch, and rigid foam is higher.

What R-value do I need?

It depends on your climate zone and the part of the building. Your local energy code lists minimums.

CallGet a quote